Printable View
OrTegSC: We have similar rides, but even before I put in the mm inserts I did not have as bad a wheel hop problem as you describe.
I'm rolling on Yoko AVSi 205-50-15. Maybe you could try some different tires as well as put the inserts in.
------------------
Greg Holden
96 GSR, JSRC @6psi, AEM CAI/RSR 4-2-1/Greddy PE, Cartech 20005/Walbro GSS-342, KYB AGX/H&R OE Sport/ST 19mm Rear Swaybar
Best 1/4 ==> 13.937 @ 101.41mph
My JRSC Install Site
sjoback:
Any tricks to installing the rear one?
Whats the story with the tranny mounts? How much of a difference do those make?
------------------
'98 GSR JRSC with all sorts of high-performance, high-tech, overpriced stuff packed in all over the place.
http://www.donia.org/clandestine
hahahah. yeah put it in when you do a motor swap. easiest install of a motor mount I have ever done!!
I never bothered to attempt when the motor was in. too much effort.
PROTHANE MOTOR MOUNTS CURED IT ON MY CAR
sjoback: Thanks for the info. I'm going to try the front 2 first, then look at doing the rear one.
Holden: Yea, the wheel hop I've been getting does seem more than normal. How may miles do you have. I've got about 45k of pretty hard miles(autocross, drag, etc). Perhaps the torque mounts in my car a worn more? (I'm currently on P7000 205/50R15, but the problem was almost as bad on the SP9000 205/50R15s)
-Jeff
OrTegSC: I have 53K miles on my car. 8K miles SC. 6 1/4 mile runs. 80 or so autocross runs.
I'm pretty mellow when not competing, but use my car for everything it's got when I am competing.
Greg